Multiprocess MIG/MAG welder ELECTROMIG 400 SYNERGIC, 230/400 V, basic version (816909, TELWIN)
- Multiprocess inverter welding machine (MIG-MAG/FLUX gas shielded/BRAZING/MMA/TIG DC-Lift) with 4-roller wire feeder, 400A. 3ph 230/400V power supply.
- OneTouch synergic adjustment: easy to use. 40 pre-set synergic curves for various gases and materials.
- Possibility of creating, saving and retrieving customised welding programs.
- ATC (Advanced Thermal Control) to facilitate welding on thin materials.
- Ample, immediate and easy reading LCD display.
- High performance with reduced consumption.
Technical data
| Mains voltage (3-phase) | 230 / 400 V |
| Mains tolerance | -15/+15 % |
| Mains frequency | 50 / 60 Hz |
| Max DC current (EN60974-1) | 400 @ 30% A |
| Welding current range (DC) | 20 - 400 A |
| Current at 60% duty cycle (DC) | 270 A |
| Current at 100% duty cycle (DC) | 210 A |
| Max absorbed current | 25 A |
| Max no-load voltage (DC) | 73 V |
| Output voltage (MIG) | 9 - 34 V |
| Absorbed current at 60% | 15 A |
| Absorbed power at 60% | 9,5 kW |
| Max absorbed power | 16,5 kW |
| Fuse | 16 A |
| Max DC current (EN60974-1, 230 V) | 320 @ 25% A |
| Welding current range (DC, 230 V) | 20 - 320 A |
| Max absorbed current (230 V) | 33 A |
| Max no-load voltage (DC, 230 V) | 106 V |
| Output voltage (MIG, 230 V) | 9 - 30 V |
| Max absorbed power (230 V) | 12,6 kW |
| Fuse (230 V) | 25 A |
| Efficiency | 89 % |
| Electrode diameter | 1,6 - 8 mm |
| Steel wire diameter | 0,6 - 1,6 mm |
| Stainless steel wire diameter | 0,8 - 1,6 mm |
| Aluminium wire diameter | 0,8 - 1,6 mm |
| Flux-cored wire diameter | 1 - 1,2 mm |
| Brazing wire diameter | 0,8 - 1,2 mm |
| Wire spool size | 200 - 300 mm |
| Feed rolls | 4 |
| Wire speed range | 1,5 - 20 m/min |
| Supply cable length | 2,50 m |
| Insulation class | H |
| Protection degree | IP23 |
| Dimensions (L × W × H) | 86,5 x 39 x 91,5 cm |
| Weight | 42 kg |
| Brand: TELWIN |